0086 13252225321 [email protected]

DC24V LED Inground Light Manufacturer | 24V Outdoor Ground Lights

  • 24V LED Inground Light
  • DC24V LED Ground Light
  • 24V Outdoor Inground Light
  • Description

DC24V LED Inground Light for Outdoor Landscape Lighting

Chip: Epistar SMD/CreeCCT:3000K/4000K/6000K

Material: Aluminum cover, Aluminum body,

PC cover (Clear/Frosted), ABS box

Input Voltage:12V/24V/100-240V 50-60Hz

Rated Power: 3W

Hole size: D95*H85mm

N.W. 0.4kg


A DC24V LED Inground Light is a low-voltage outdoor lighting fixture designed for recessed installation in landscape and architectural environments. Powered by a 24V DC power supply, it can be used in gardens, pathways, hotel entrances, commercial plazas and selected building landscape applications.

Compared with directly mains-powered lighting systems, a DC24V LED inground lighting system uses a separate power supply to convert the incoming electrical supply into 24V DC. This configuration is useful for projects where low-voltage lighting distribution is preferred and where the electrical installation can be planned around the power supply, cable layout and fixture locations.

Always Lighting supplies outdoor LED inground lighting products for wholesalers, distributors, engineering contractors and commercial lighting projects. Depending on the selected model, product options may include different wattages, beam angles, color temperatures, housing materials and lighting effects.

If you are sourcing 24V LED ground lights for an outdoor project, it is important to evaluate not only the fixture itself but also the complete electrical system, including power supply capacity, cable length, voltage drop and installation conditions.

What Is a DC24V LED Inground Light?

A DC24V LED inground light is an outdoor recessed lighting fixture designed to operate from a 24V direct-current power supply.

The typical system consists of:

  • An AC input power source.

  • A compatible AC-to-DC 24V power supply.

  • DC24V distribution cables.

  • LED inground light fixtures.

  • Compatible control equipment, if required.

The power supply converts the incoming electrical supply into 24V DC for the connected fixtures. The installation should follow the electrical specifications of the selected LED model and power supply.

DC24V is a low-voltage power configuration commonly considered for landscape and decorative outdoor lighting systems. However, the power supply, wiring, connectors and installation environment must all be selected and installed correctly.

Key Features of DC24V LED Inground Lights

1. 24V DC Low-Voltage Power Supply

DC24V LED inground lights operate using a 24V DC input rather than connecting directly to an AC220V supply.

A compatible power supply is required to convert the incoming AC voltage into the specified DC output.

For project installations, the power supply should be selected according to the total connected fixture load, electrical specifications and manufacturer's recommended operating conditions.

2. Suitable for Outdoor Landscape Lighting Systems

DC24V configurations can be considered for outdoor landscape lighting layouts where a centralized or distributed low-voltage power supply is planned.

Typical applications include:

  • Garden and landscape lighting.

  • Hotel entrances and resort gardens.

  • Outdoor pathways and walkways.

  • Commercial plazas.

  • Tree and architectural uplighting.

  • Decorative outdoor installations.

The suitability of each fixture depends on its actual IP rating, construction and environmental specifications.

3. Flexible Lighting Configurations

Different outdoor projects require different light distributions and visual effects.

Depending on the product series, DC24V LED inground light options may include:

  • Different wattages for different lighting requirements.

  • Narrow and wide beam angles.

  • Warm white and neutral white color temperatures.

  • Selected RGB and RGBW configurations.

  • Standard and adjustable lighting designs.

  • Different housing and cover materials.

Always confirm the available configurations for the specific model before ordering.

4. Multiple Beam Angles for Different Applications

Beam angle determines how light is distributed from the ground toward the target object.

Depending on the optical design, available options may include:

Beam AngleTypical Application
10°Focused tree and architectural accents
15°Narrow-beam uplighting for columns and landscape features
30°General landscape and selected facade accents
45°Wider garden and landscape illumination
60°Broad ground-level lighting

The correct beam angle depends on fixture position, target height, installation distance and desired lighting effect.

5. Different Color Temperatures and Lighting Effects

Depending on the selected model, DC24V LED inground lights may be available in different color temperatures:

  • 2700K: Warm white for a comfortable and welcoming atmosphere.

  • 3000K: Warm white for hotels, gardens and outdoor hospitality spaces.

  • 4000K: Neutral white for modern commercial and architectural environments.

  • RGB/RGBW: Color-changing effects for decorative landscape lighting.

For RGB and RGBW installations, make sure the controller, power supply and wiring arrangement are compatible with the selected fixture.

DC24V vs AC220V LED Inground Light: Which Is Better?

One of the most common questions during outdoor lighting procurement is whether to choose DC24V or AC220V LED inground lights.

Both configurations can be used in outdoor lighting projects, but they require different electrical arrangements.

ComparisonDC24V LED Inground LightAC220V LED Inground Light
Input24V DC220V AC, where specified
Power SupplyRequires compatible 24V DC power supplyDepends on the fixture's internal or external driver design
Wiring DesignRequires planning for low-voltage distributionRequires mains-voltage installation
Cable LengthVoltage drop needs careful considerationElectrical design depends on the fixture and circuit
Typical ApplicationsLandscape and decorative lighting systemsOutdoor installations designed for mains-voltage fixtures
InstallationRequires compatible DC wiring and connectionsRequires appropriate mains-voltage wiring and protection

When Should You Choose DC24V?

DC24V may be a suitable option when:

  • The project design specifies a 24V DC lighting system.

  • A compatible power supply can be installed in an accessible, protected location.

  • The cable layout and voltage-drop calculations can be properly managed.

  • The project uses compatible 24V lighting controls or fixtures.

  • The installation requires a low-voltage lighting distribution arrangement.

When Should You Choose AC220V?

AC220V may be considered when:

  • The project electrical design specifies mains-voltage fixtures.

  • The selected product is designed for direct AC220V input.

  • The installation requires a suitable mains-voltage circuit arrangement.

  • The project has been designed and approved for this electrical configuration.

There is no single best voltage for every project. The correct choice depends on the fixture design, electrical layout, installation distance, power supply arrangement and local electrical requirements.

Important Considerations for DC24V LED Inground Light Installation

A DC24V lighting system needs proper electrical planning. The following factors are particularly important for larger outdoor projects.

1. Choose the Correct 24V Power Supply

The power supply must match the fixture's specified input voltage and electrical requirements.

Calculate the total connected load before selecting the power supply.

For example, if a project uses 20 fixtures rated at 6W each:

20 × 6W = 120W total connected load.

The power supply should have sufficient capacity for the connected load and follow the manufacturer's recommended operating margin. If the installation is divided into several circuits, calculate the load of each circuit separately.

Also confirm whether the selected LED fixture requires a constant-voltage or constant-current driver. A 24V label alone does not establish driver compatibility.

2. Consider Voltage Drop Along the Cable

Voltage drop is an important consideration for DC24V outdoor lighting systems, particularly when fixtures are installed far from the power supply.

Long cable runs, insufficient cable cross-section and high connected loads can cause voltage drop. This may lead to reduced brightness or inconsistent lighting performance.

To reduce voltage-drop problems:

  • Calculate cable length and connected load before installation.

  • Select an appropriate cable cross-section.

  • Divide large installations into suitable circuits.

  • Consider distributing power supplies closer to fixture groups.

  • Follow the manufacturer's wiring recommendations.

For large projects, a qualified electrical professional should verify the cable design and voltage-drop calculations.

3. Check Waterproof Protection

DC24V does not automatically mean that a fixture is waterproof.

For outdoor installation, confirm the actual IP rating of the complete luminaire and check the specifications of cable connectors and junction boxes.

IP67 models are designed to be dust-tight and protected against temporary immersion under specified test conditions. They are not automatically suitable for permanent underwater installation.

4. Plan the Installation and Drainage

Recessed ground lights are installed in locations where rainwater and ground moisture may accumulate.

Before installation, check:

  • Fixture and mounting sleeve dimensions.

  • Installation depth and ground structure.

  • Cable entry and connector arrangement.

  • Drainage conditions.

  • Access to power supplies and electrical connections.

Correct installation helps maintain the intended performance of the complete lighting system.

5. Confirm the Lighting Effect Before Installation

For landscape and architectural projects, beam angle, fixture spacing, mounting position and target height should be considered together.

A lighting layout or sample test can help confirm the expected effect before installing large quantities of fixtures.

Applications of DC24V LED Inground Lights

Garden and Landscape Lighting

DC24V LED inground lights can be used to highlight trees, shrubs, flower beds, landscape walls and decorative garden features.

Choose the beam angle and wattage according to the height and size of the target object.

Hotel and Resort Landscape Lighting

Hotels and resorts often use recessed ground lights around entrances, outdoor walkways, gardens and landscape structures.

Warm white options can create a welcoming atmosphere, while selected RGB/RGBW models can support decorative lighting designs.

Pathway and Walkway Lighting

DC24V ground lights can be included in outdoor pathway and walkway lighting systems to provide visual guidance and highlight landscape boundaries.

The fixture's brightness, beam distribution and installation position should be selected to avoid uncomfortable glare.

Building Facade and Architectural Lighting

Inground uplights can illuminate exterior columns, walls, architectural details and building structures from ground level.

Narrow beam options can highlight selected features, while wider beams can provide broader illumination.

Commercial Plazas and Public Spaces

Commercial plazas, office buildings and outdoor public spaces may use DC24V inground lights for decorative landscape lighting and architectural accents.

For projects exposed to pedestrian or vehicle traffic, confirm the fixture's tested mechanical load rating separately from its IP rating.

DC24V LED Inground Light Options from Always Lighting

Always Lighting provides outdoor LED inground lighting products for different landscape and architectural applications.

Depending on the product series, available configurations may include:

Product ConfigurationSelection Considerations
Standard DC24V LED Inground LightGeneral recessed landscape lighting
Adjustable DC24V LED Inground LightDirectional illumination for selected features
Side Emitting LED Inground LightSide-lighting effects for decorative applications
RGB/RGBW DC24V LED Inground LightColor-changing landscape lighting, subject to model compatibility
IP67 DC24V LED Inground LightOutdoor applications requiring the specified IP67 protection

For each model, confirm the actual power, input voltage, IP rating, beam angle, dimensions and control requirements.

Why Choose Always Lighting for DC24V LED Inground Light Projects?

Always Lighting supplies outdoor LED lighting products for overseas wholesalers, distributors, lighting contractors and commercial project buyers.

When sourcing DC24V LED inground lights, we can help review your project requirements and identify suitable product options from the available product range.

Our support can include:

  • Different LED inground light designs and dimensions.

  • DC24V configurations for compatible models.

  • Different wattages and beam angles, depending on product availability.

  • Warm white and selected RGB/RGBW options.

  • Product specifications for technical evaluation.

  • Discussions about OEM/ODM requirements for suitable models.

  • Product selection and quotation support for wholesale and project procurement.

We understand that a successful outdoor lighting system depends on more than the fixture itself. Power supply capacity, cable layout, optical performance and installation conditions should all be considered during product selection.

Share your project drawings, estimated quantity, voltage requirements and application details with our team to discuss suitable DC24V LED inground light options.

Frequently Asked Questions About DC24V LED Inground Lights

1. What is a DC24V LED inground light?

A DC24V LED inground light is a recessed outdoor lighting fixture designed to operate from a 24V DC power supply. It is used in landscape, garden, pathway and architectural lighting applications.

2. Do DC24V LED inground lights need a power supply?

Yes. If the fixture is designed for 24V DC input, it requires a compatible power supply that converts the incoming electrical supply into the specified 24V DC output.

3. Can I connect a DC24V LED inground light directly to AC220V?

No. A fixture designed specifically for DC24V must not be connected directly to AC220V. Use the compatible power supply specified by the manufacturer.

4. What is the difference between DC24V and AC220V LED inground lights?

DC24V models operate from a 24V DC power supply, while AC220V models are designed for the specified mains-voltage input. They require different electrical arrangements, wiring considerations and installation procedures.

5. Are DC24V LED inground lights suitable for outdoor use?

They can be suitable for outdoor applications when the selected fixture has the appropriate IP rating, materials, operating temperature range and installation design for the environment.

6. Are DC24V LED inground lights waterproof?

The input voltage does not determine waterproof performance. Check the actual IP rating of the fixture and the protection specifications of its cable connections and accessories.

7. How do I choose a power supply for DC24V LED inground lights?

Calculate the total wattage of all connected fixtures, confirm the required output current and voltage, and follow the manufacturer's recommended power-supply margin. Also check whether the fixture requires constant-voltage or constant-current operation.

8. How can I avoid voltage drop in a DC24V lighting system?

Calculate cable length and connected load, select a suitable cable cross-section, divide the installation into appropriate circuits and consider locating power supplies closer to groups of fixtures.

9. Can DC24V LED inground lights support RGB or RGBW?

Selected models may support RGB or RGBW lighting. The power supply, controller, wiring and fixture configuration must be compatible with one another.

10. What beam angles are available for DC24V LED inground lights?

Available beam angles depend on the product model. Options may include 10°, 15°, 30°, 45° and 60° for different landscape and architectural lighting applications.

11. Can DC24V LED inground lights be used in areas with vehicle traffic?

Only fixtures with a suitable tested mechanical load rating should be installed in vehicle-accessible areas. DC24V and IP ratings do not indicate the fixture's load-bearing capacity.

12. Can I order DC24V LED inground lights for wholesale or engineering projects?

Yes. Contact Always Lighting with your required wattage, quantity, beam angle, color temperature, IP rating and project application to discuss suitable product options and supply arrangements.

Request a DC24V LED Inground Light Solution

Looking for DC24V LED inground lights for a landscape, hotel, commercial or architectural lighting project?

Contact Always Lighting and share your technical requirements, estimated quantity and installation details.

Our team can help you review suitable models and discuss the electrical and optical configurations for your outdoor lighting project.


Quick Inquiry